Chalk Paint Cards

Hi Crafties!
This is my last project as a DT member for Itsy Bitsy 2019.
Let’s move on to today’s project…
I have several CAS cards for you today featuring Chalk Paints!
CAS stands for Clean and Simple cards. You can make all of these cards in a short time!
For the 1st card :
Step 1:
I used several colors of Chalk Paints. Do let me know in the comments below if you would like to know the names of each!
I used the paints with a flat brush in a swiping motion and then let them dry.
Step 2:
On this panel, I stamped the ‘Flowerful Gratitude’ stamp set with black ink.
Step 3:
Then I foam mounted the panel on a white card base and stamped a sentiment. I also rounded the corners for added interest. And my card is complete!
Now lets move to the next cards –
Both the cards are created from a single panel.
Step 1:
I did the wet on wet watercolor technique. It entails first giving a wash of water on the card panel and then coming in with the colour of your choice. I used Deep Sea Blue and Marsh Green chalk paints.
I let the colour flow on its own.
Step 2:
After drying the panel completely, I die cut the leaf from Fern forest dieset by Little Birdie.
Step 3:
You get two cards out of this. I adhered the negative panel on an A2 card base and stamped the sentiment.
I also created some splatters and added Little Birdie pearl drops.
Step 4:
I then swiped three stripes of chalk paint Marsh Green on a white card panel. And then glued the positive leaf diecut on it and stamped the sentiment.
*To match the colour of the diecut, I painted the borders of the card base with same Deep Sea Blue chalk paint*
Moving on to the last 2 cards.
Step 1:
I used the net stencil with Sailing Sky chalk paint on a white card base.
After I lifted the stencil, I immediately pressed the other side of it on another white card panel.
So you get 2 cards out of this one too!
Step 2:
I stamped the ‘Flowery wishes’ stamp on the stenciled image.
Step 3 :
After repeatedly stamping the sentiment, I glued the panel on a black A2 card base.
Step 4 :
I colored another white card panel with Charcoal chalk paint. And then diecut that panel twice with the same leaf die.
Step 5:
I adhered these 2 diecuts on the faded stenciled image panel. After stamping the sentiment and adding the pearl drops, both cards are complete.
I hope you liked my projects.
Which project did you like more?
Do let me know in the comments below.
Have a great day ahead!
Priyanka

Peas Forgive Me

Hello Crafties!

I am really loving the Magic Picture Changer dieset by Lawn Fawn so much so that I use it to make every other card with it.😆

You can see a short video of the card below :

The Be Hap-Pea stamp set by Lawn fawn is another stamp set I can’t get enough of.

I made this card as all the earlier Magic Picture changer cards.

You can find them here , here & here .

For this card, I added an extra diecut circle and did some cloud stenciling with Tumbled glass distress oxide.

I also used the border-dies by Lawn Fawn on the base.

I also used the other small stamp images from the above stamp set on the base.

This cute stamp set makes a sorry card look cute too!

Who wouldn’t forgive after receiving it? 😉

Do let me know your thoughts in the comments.

Thank you for stopping by…

Have a great day ahead!

Priyanka

.

.

.

.

.

Playing along

Lawn Fawn Challenge #51 : Sketch Challenge

Simon Says Stamp Wednesday Challenge : Spring mood board

Simon Says Stamp Monday Challenge : Going round in circles

The Crafty Superstar 2019 – Prika

Tree Jewelry Holder featuring Craft Cement!

Hey Crafties!
I am back with another project for Itsy Bitsy.
This month’s Blog Challenge is Challenge #19: Anything Goes using Little Birdie Craft Cement.
Little Birdie Craft Cement is such a versatile product. You can use any mould/plastic box available at home to make different types of holders!
Today, I have a step by step photo tutorial to help you create a ‘Tree Jewelry Holder’.

Let’s begin :
Step 1
Let us first make the tree. For this, I die cut bright white cardstock and 2 different shades of brown handmade cardstock using ‘Flowering Tree’ thin cut die. All products are by Little Birdie.
Step 2
I adhered all three of the tree die cuts in such a way that they were not aligned exactly behind each other and was slightly off. I did this on purpose so that you can see each color peeking a bit.
* You can use different shades of same color cardstock to give added dimension to your die cuts *
Step 3
I then die cut the little flowers & leaves that come with the ‘Flowering Tree’ die set using different colors of felt.
Step 4
The next step involves sticking these leaves & flowers on the tree.
This is how it looks :
Step 5
Let’s make the base now!
I mixed the required amount of Little Birdie Craft Cement gradually with water till I got a flowing consistency. I applied a bit of petroleum jelly (Vaseline) on the inside of the plastic box. Then I poured the cement mixture into it. You can use whatever box is available.
* Pour water gradually into the cement and not in one go *
Step 6
I let the cement sit in the mould for about 10 min and then pressed the tree upright inside it. I also pressed a small lid beside the tree to create a holder for my jewelry.
* Put a heavy object inside the small lid to create a deeper dent *
Step 7
I kept it aside for 24 hours and then took the cement base out of the mould. I also took the lid out. It looks like this :
Step 8
Now Lets decorate the jewelry holder we made. I applied Glass Bead Gel with a spatula on the base of the tree and let it dry till it turned transparent. This gives the effect of small rocks at the bottom of the tree.
Step 9
After this I painted the base with ‘Charcoal’ chalk paint. To finish off, I glued some leaves and flowers that were leftover from Step 3 on the base of the tree with silicon glue.
Ta da! Our project is complete!
Do let me know your thoughts in the comments.
Have a great day ahead!

Priyanka